Within this week. I’m falling a little behind since school takes up most of my day, but I am managing to make around 4 mounts per day. I only invoice when I have the product ready. A lot of people’s are going out tomorrow.
I have a “friend” that is going to visit her sister that lives in Indianapolis, and she travels to Indianapolis during Halloween. So i was wondering if you could send it to Indianapolis before she travels back home to Denmark in late October/early November? So I can skip the import taxes, is it possible for you to make a mount and send it before going back home to Denmark?
Hi there,
I really like your mount design and the fact that I can adjust the idler.
I was wondering if I could order a custom truck clamp, I run Bennet Vectors and I cannot find any motor mount that fits them!
Let me know if you can and I’ll go back and make the measurements required.
Thanks a lot! Ervine
Thanks man. Stay on that grind, school is the priority.
1 Like
If anyone is looking for this mount I have one for sale that has barely even been used. Literally I have only ridden with it around the block twice.
I can’t get it to stay mounted to the truck at all. My loss, your gain. . Mine came with a 12mm belt, but I bought a set of 15mm belts so I can give you a 15mm one with the mount if you want.
PM me $30 shipped anywhere in USA
called it
I was skeptical when buying for the same reasons.
Sorry to hear that it didn’t work out for you. I have a lot of future designs in the making though. This is mk1
consider a two piece clamp, with big ass bolts going all the way through so you can really put some torque down on it.
i’d be all over it if that were the case.
Stay tuned a lot of that is in the works
So for those of us who have purchased mk1 …
Has it been tested and works on other setups? Can I trust it? I only have a few mm between motors and if it comes loose it could destroy my motors.
i agree with @gbutcher, does it actually work? Have you tested it?
Do not mean to sound mad, just worried 
I tested it on my mini board and it did not come loose. I ordered everything for my brand new board and that is where I will torture them as much as I can. If you are worried it will come loose, it will help to drill a shallow hole where the set screw goes. A lot of people do that with this type of mounting system.
I have a new design in the works though that uses that said 2 piece clamping system. I know what you are thinking though, “How does that help us mk1 buyers?” The arm piece will be compatible with the new clamp (and the new arm) as it will feature the same screw hole pattern. Once the new redesign is all done, I will sell the new design and give anyone who bought an mk1 an updated clamp for free.
Not only will the mk2 be a redesign, it will also be much cheaper. I am switching to clearance holes with a bolt running through with a lock nut on the other side, vs tapping the actual clamp. Much faster. They are going to be waterjet by a nearby service instead of machined by me. Expect the price to be around $30.
3 Likes
Sound really nice man!! Thanks for the update 
Just paid my order. Would have gladly waited for the 2 piece clamping system if not too long of a wait. Glad to hear you’ll offer the 2 piece clamp design at a later date if we have problems.
Yeah, to anyone that bought the first design will get the 2 part clamp free, as sort of a gift for being an “early supporter” I don’t really have an ETA because I would like to test print one first. The design hasen’t quite been done before so it may take some work, but it should be rock solid as it will use no set screws, but big M6 bolts and a nylon locknut
2 Likes
I sent payment right after receiving the invoice a few weeks ago. Can you please estimate shipping time?
@MaxAssist @deucesdown @MustardTiger @machadolab Printing the labels for you guys today. Will send them to post office today within 6-7 hours. You’re all USA so they should arrive by around Wednesday or earlier.
1 Like
Thanks for the update. Sounds great. Cheers.
The V2 clamp design is not quite ready yet. I am modeling it later tonight. After that I will cut the prototypes and test them on my newly made board. It should be extremely strong and 100% compatible with the old board style.
As for 15mm belts, those will be coming too. To everyone that ordered thus far has recieved 12mm as that is all I have. I buy in bulk and compatibility is key. 12mm works with 12mm pulleys and 15mm pulleys.
If I get the design waterjet locally instead expect a price reduction!