Here’s that Contest! Design and WIN sponsored by Shredlights! Bragging rights too!

be uploadin my dream board in bit. gotta work on my dusty photoshop skills lol

2 Likes

wasn’t joking when I said dusty shotoshop skills …its the build that matters…i hope :joy: “the black sheep”

deck: 33" torqueboards rocket full carbon fiber integrated battery pack deck 300euro collections/longboard-decks/products/33-torque-rocket-carbon-fiber-deck

battery: 10s4p Samsung 30q battery pack 156euro https://www.nkon.nl/samsung-inr-18650-30q-3000mah.html

wheels: abec 11 97mm flywheels (dyed black :wink: ) 130euro

dye: idye poly black 5euro

risers: rayne bamboo risers 1/4 flat pad and 50degree angled risers pad 4.50+ 4.95 https://www.sickboards.nl/en/accessories/3251-rayne-flat-1-4-riser.html

dual focbox vesc running foc 220 euro (lhb) https://longhairedboy.com/collections/all/products/focbox-electric-skateboard-motor-controller

bms: aliexpress Bluetooth bms 50euro ( setup the bms remotely from your pc and monitor your without opening it up…plus ya get a cool app :slight_smile:

motors: dual 6374 190kv streetwing motors 240euro (DavidBanner) https://street-wing.com/product/6374-190-kv-motor/

trucks: torqueboards 218mm trucks with calibre 2 baseplates 60euro + 35euro products/torqueboards-218mm-trucks

bushings: riptide wfb barrell bushings 93a 11.50euro

riptide wfb cone 88a bushings 11.50euro

cupped washer: khiro large cup washers 4.50euro

sleeved washer : atlas precision top hat sleeved washers 14.95euro

bearings: bones reds 22.50euro https://www.sickboards.nl/en/bearings/575-bones-reds-bearings-8x608.html?search_query=bones red&fast_search=fs

remote: nano v2 remote 60euro collections/remote-controller/products/torqueboards-2-4ghz-nano-remote-controller total: 1347.85euro

literally a full build there and will nearly all be in up coming build except for the deck, trucks and single setup instead dual :smiley: if someones looking for a parts list look there it is :joy:

3 Likes

@GrecoMan, sick build. Have you thought about adding a few 3D printed bumpers/topcaps? I believe @FLATLINEcustoms has some uploaded to thingiverse that would send that build over the top!!!

1 Like

hold my beer

Also, oatmeal chocolate chip! :stuck_out_tongue_winking_eye:

1 Like

awwwwww shit, I dont have the model on my PC anymore :sob:

Oct 26 FLATLINEcustoms | Agent Orange | 40" Arbor Axis | Single SK3 6374 Motor | 12s Lipo (4 x 3s 5000mah) | VESC Esk8 Builds The drop through covers are up. Loop Key Mount: http://www.thingiverse.com/thing:1558717 Digital Voltmeter: http://www.thingiverse.com/thing:1558740 Remove Bookmark Oct 26 FLATLINEcustoms | Agent Orange | 40" Arbor Axis | Single SK3 6374 Motor | 12s Lipo (4 x 3s 5000mah) | VESC Esk8 Builds @Krudte @emancarrillo plain bumper, rear LED bumper and front bicycle headlight bumper is up Plain Bumper: http://www.thingiverse.com/thing:1519554 LED Bumper: http://www.thingiverse.com/thing:1519598 Headlight Bumper: http://www.thingiverse.com/thing:1519922

1 Like

nah just dont have the entire board saved anymore

Am I a lucky winner?

I think its safe to say @GrecoMan

yay 10chars

how do i claim my prize?

Pmd @GrecoMan

My Simpsons meme tied for second place! :grimacing:

1 Like

LOL, if you had won with a simpsons meme i would’ve been piiiiiiiiiiiiiiiiiiised

1 Like

@GrecoMan i sent Eric at Shredlights your Info … hes just back from holiday break since he goes to university as well… i bug him if you don’t get anything by next week

2 Likes

so what do the runners up get any bronze medals goin xD

Should have entered😂

2 Likes

i’m fine that you didn’t :wink:

2 Likes

@GrecoMan your Shredlights should be in the mail tomorrow. You should get an order conformation in your email soon.

Congrats again my brother well done.

2 Likes