Yep just plug into bms, you might need to lower max voltage using the pot(assuming it has one) on the PCB in the charger, if the BMS will have lower cutoff voltage
Ah okay gotcha. Makes sense! Thank you for the useful information. I’m guessing I would want to set it to the max charge of my lipos, so either 4.210 or 4.110 - 42V exactly or 41V?
Yeah that’s it.
I think charging any lithium to 4.2 is harmful and a bit silly, I’ve never encountered a mass production device, like every laptop on the planet, charge above 4.15 per cell. There is simply no benefit at 4.1-4.2, you only lose cycles and with lipos early puffing.
that’s fine, i just found end of charge voltage to be lacking so stepped up to 12s. a 12s4p is has eight more cells than 10s4p but it’s just stronger all through the charge range.
The reason I didn’t go with that one is that it’s a bit high at 1.5cm and the balance leads face upward meaning you need even more headroom to have it fit.