Just to be clear, because I could totally see how something I write is taken as a jibe I’m genuinely interested, no malice intended.
You weigh 200 pounds?? I pictured you as skinny for some reason
I’m 200lb with my pack on. And I pretty much never leave the house without my bag. Most don’t believe my weight when they meet me. Carry it well i guess.
The inserts are manufactured with high tolerances, and the system is held by friction. It works for me, but I am lightweight and not a heavy user. The idea for the next few weeks is to see if this system is viable and generalizable. If it is not, those pulleys will be converted to bolt pulleys, and the next batch will be bearing pulleys.
I didnt think he was 200 either… then again, the munchies are real… im 210 with no pack on lol
That is really good to hear I have been wanting to try out the press on pulleys but I like to use zealous bearings for the time being may be switching over to the precision bearings that have in testing right now. I have a fresh set of ollin popoca waiting for some pulleys to be put on.
What material are they made out of?
There are made of aluminium 6061, and we are testing to see if it suits this application
Thanks for answering they look really good.
are they CNC or cast molded?
Hello!
Sorry, it has been a long time ago since my last update.
@murdomeek the pieces are CNC made.
Finally, after redesigning, parts are now ready for the first sell!
Motor mount - 50€
- Material: AL7075 (for this batch only)
- Center distance: 65mm
- Thickness: 8mm
- Fully adjustable
- Compatible with caliber
- Compatible with 50mm and 63mm motors
Wheel pulley - 45€
- Material: 6065
- Pitch: HTD5M
- Teeth: 36T
- Belt size: 12mm
- Bearings: Pressed Super Red Bones
Motor pulley - 9€
- Material: Steel
- Pitch: HTD5M
- Teeth: 15
- Belt size: 12mm
- Bore size: 8mm
- Length: 24mm
- 2*M4 grub screws
- 3mm keyway
Belt - 9€
- Brand: GATES
- Pitch: HTD5M
- Length: 265mm
- Wide: 9mm or 12mm
Single mechanical kit - 110€
- Motor mount for caliber trucks
- Wheel pulley with Red Bones bearing - HTD5M 36T 12mm
- Motor pulley with 2 grub screws and a keyway - HTD5M 15T 12mm
- GATES Belt - HTD5M 265T 9mm or 12mm
Shipping (from Switzerland by post)
- to Europe: 12€ (4-8 days)
- to other countries: 17€ (7-15 days)
I have only 10 parts ready to be shipped for this batch. Contact me by MP for orders
I would reccomend starting and posting a copy of this thread on forum.
Hmm almost a year and a half since last update lol
And these seem kinda pricey considering the stuff we have now
Definitely lol
Push fit / screw on exactly what I suggested long time ago!
It’s going to be hard to tension that belt with the wheel in the way.
@DEEIF Thanks for your suggestion. I am doing it now!
@ARetardedPillow It is true that it has been a long time, but the last message was 4 months ago We have set high standards for our supplier to meet, which increase the production cost.
@anon42702729 Yeah! Of course, we take into account the suggestions made on this forum. After consideration, using no bearings and no screws won’t fit any use. But it takes some time to redesign, retest and send to production.
@torqueboards No worry, it is only for the pictures. I think the side with screws is quite cool. But of course, you can reverse it:
oh, you party pooper, you…
So, for this time I am willing to sell at lost by lowering my prices. Next orders will be bigger, no worry. I have updated the first post, but here is the summary of the new prices:
- Motor mount: 50€
- Wheel pulley: 45€
- Motor pulley: 9€
- Belt: 9€
- Kit: 110€
I hope you find those prices fair. I won’t be able to go below that, unfortunately. Anyway, you won’t be disappointed.