I have Caliber II trucks with 6355 dual motors and @Titoxd10001 motor and wheel pulleys with 265mm belts on 97 Abec 11s. You are are good to go.
@Titoxd10001 please make some 36T or 38T pulleys, I need more speed! The 15/40T combo has a good torque but max speed could be a tad higher.
I’m not sure if I could change the vesc settings to increase speed somehow.
Hey man I’m also in LA, can i pick up direct? ow much for 4 sets?
Shipping outside of US is expensive. Not sure if there is cheaper option, but the one I know is $23.95. I got another order from Canada and if I can group you guys together I can probably do $15 shipping total.
That sounds pretty good, if the other guy is also in/near Vancouver and willing to group it up I’m all for it. If not I’ll just pay the 23.95 
What I did is go 11s(12s didn’t fit unfortunately). Same speed as going down to 36t, but kept the torque. Still waiting for Batman bms to make it easier to charge though
What I mean is one person ships to the other person. If you could receive and ship to other person let me know. I’ll contact him also
But 11s would require a new BMS and a new charger. I might get away charging only until 42v 90% but I’ll need a very special bms definitely or go no BMS at all.
You can try to get a 16t motor pulley. I like higher reduction so I don’t think I’ll carry 36t
Can you get 16T pullies?
A 16T pulley would increase the final speed to almost 3km/hr that would be enough for me. Can you get them?
Not at this time unfortunately
Hi Tito, I’d like to get 6 x 15T steel pulleys to Melbourne Australia if you have any left.
Yes, I have plenty left. I’ll PM you
@Titoxd10001 hi there! Could you please send a PayPal notice for 2 combo sets? Here is my email: [email protected]! Thank you! I will DM you my home address. Can’t wait to try these!
Okay, sent
I would like to get 3 sets shipped to Israel, do you think I should wait for the EU distribution?
Awesome! Just sent payment, you should have my address on the Pay Pal payment. DM me if you don’t. Thanks so much for making this available to the community! I’m real excited as I’ve upgraded wheels several times from 83 to 90 to 97 and now finally to 100 mm MBS wheels. I’ve noticed that at 97 and 100 upgrade my 16/36T motor/wheel pulley ratio seems to be a bit lagging and at the same time I’m at on a mono drive so the motor seems a bit warmer than when I was on 83 or 90. So, with that said, this 40T pulley should take some stress off the motor. Again, appreciate you bulk buying for the community! 
I bought 2 16T from ( http:// ), one was a pulley kit and 2 wks. ago I bought a single 16T. Great products from Diy.