Raptor 2.0 Issue with board accelerating alone

Hello all,

For some time now, when I turn on my raptor 2.0 I see a CRITICAL issue. After some time the board suddenly starts to accelerate like crazy and when I break, all it does is disengage the motors (doesnt stop, just cuts the current flow, like having the throttle in resting position). If I take the throtle to resting position when this happens, the motors accelerate like CRAZY.

Is there a way I can fix this? Has anyone had a similar issue? Any tips and instructions are GREATLY appreciated!

Regards to all!

Freddy (Austria)

At first, Im not an expert in raptors. Second: to me it looks like your remote not centered (in it there is a nut turning which would change center pulsewidth for remote) image

just turn this nut until board would stop when throttle is untouched.

or you can measure pulsewidth in app for foxbox to center pulsewidth with software

Make sure that you are calibrating your remote every time you ride. Here is a link

1 Like

This​:point_up:t3::point_up:t3::point_up:t3::point_up:t3::point_up:t3: Calibrate the remote