Sharplace BMS on Amazon, anyone used it?

There should be a diagram somewhere Do you want to sell me 2?

Sure. PM me

just saw your in the US, im in Croatia…

1 Like

Probably better off buying from amazon at that point due to shipping. Good luck in the World Cup

1 Like

Thanks man i didnt know americans watch as you call it “soccer” :smiley:

Isnt that amazon shop based in China?

there are some sellers in UK

Really? I can see that it dispatches from China :sweat_smile:

https://www.amazon.co.uk/gp/offer-listing/B07514MZDH/ref=dp_olp_new?ie=UTF8&condition=new

1 Like

if you have one to sell pm me does not even have to be the model from the link

Sorry I dont have one, make a thread maybe?

imageimage Can someone help me with a wiring diagram for this. It is the same BMS as the link above.

1 Like

Good luck against lucky Brits tomorrow.

1 Like

How much for the other BMS?

@pixelsilva $15+shipping from seattle, WA

1 Like

You are better off buying from amazon directly. Amazon.com

# Top-Rated Electric Skateboards of 2023 | Personally Vetted Amazon Selections

1 Like

I have this bms and it works well, although slightly higher balance current would be nice.

The b- goes to your battery negative, c- is charger negative and p- is if you run through the bms but I think you said you aren’t so just leave that one. The balance leads should be numbered 1-11 so they just need to be connected sequentially starting from the 1st balance lead or the one on the negative of the battery.

Also make sure to connect B- before the balance leads or it can fry the bms

Thanks alot

1 Like

@pat.speed There are only 10 pins on the balance connector which are marked b1±B10+. If you look at the pictures there is a small thing marked gnd on the left that doesn’t have a pin. Do I need to run a negative wire to that>

Ahh ok my mistake this must have been the bms that had only 10, sorry I thought it was my other one. You don’t need to run the pin to ground as it is already connected through the b- connection, just number them normally skipping the 1st pin

1 Like