@MontPierre
I must say, that this is one nice built PSU in alu chassis
It has a fan though, but it dosn´t run when powering up the psu, so maybe it is temp. controlled ?
Even the instructions is well made, and not the typical “chinglish” language.
Comes with two extra fuses as well.
It has two LED`s. One for power, and one for chraging status. Nice
Just FYI, there are bunch of chargers exactly like that one from Banggood @Silverline mentioned.
And not only for 10S. Just search AliExpress, for example “cutoff_voltage charger”. I was looking for 8S therefore “33.6V charger”. You can get different charging current variants as well… 3A, 4A, 5A, 7A.
This seller has a bunch, browse through his store…
Yes, the fan is temperature controlled. It turns on and off multiple times during charging. Doesn’t yours? If not, think about contacting the seller about this.
You have 30Q batteries, right ?
Let’s go like this:
(nominal) (36V x 3000 mAh)/1000 = 108 Wh (per 10 s)
4 in parallel so 108 Wh x 4 = 432 Wh
Giving chaka’s guideline. 432 / 2 = 216 Watts charging.
216 / 36V gives you 6 amps.
So your 5 amps should be clear of spec.
Edit: If I interpolate this on my 10s3p. I should only use 3,74 amps. The quick-charger is still the same at 4 Amps. Been using this for over a year with no noticeable degradation of the battery. So you even have some moving room.