Bourgogne-Board | Arbor Axis 40" | BERGMEISTER AT Wheels | Supercarve GT truck | 5065 140kV | Dual FSESC4.20 | 10s 5Ah | GT2B 3D print

[Riako]

@"Riako

I have also received the future wheel gear in Nylon, for the GD, photo tomorrow Then I will send them back to a machinist!

I guess I have forgotten this point ^^

Like I say in another topic :

@"Riako

I will post an update of the gear drive prototype ready for e-blank-test soon (actually hand spin only…)

I was working on a GD for a long time now, and got the fkn silent etoxx one in hand for inspiration / also ready to rock on my next eMTB but here I mainly focused by the locking system of the Haggyboard motor mount and want to try to incorporate almost the same design adapted for my Gear Drive (after asking to Timo of curse), I have two sizes in test actually : A small one for 50mm only (30 (Maytech/TB/etc and 38mm (Racerstar)), with 1.5m and a bit more compact. And the bit bigger one, for 50 and 63mm motor, working with m2 and larger gear tooth. And remixing a dual helical anti-sideload (and auto-centered if I can say, after my hand spinning blank tests) gear to test after the straight one.

it’s just laid out for the photo (with the evolve trucks and mount ^^… but it should be for the Kahua truck). Now my printer resurrects, I will start to 3D print and study the mount more detailed before to make the real one!

Also the 1st post is updated